Question: Which RAM Slots To Use First?

Does RAM have to be in first slot?

If you are using SDRAM or single-channel DDR-SDRAM, then it usually doesn’t matter which modules go into which slots.

But a few motherboards require that you start with the first slot and fill them in order, so you may as well do it that way..

How do I know if my RAM slot is bad?

Open your computer and check the slots through trial and error. The only way to check your motherboard’s memory slots is to place a working RAM stick into each one and see if your machine boots properly. Remove all RAM sticks and place one you know is functional into the first slot on your motherboard.

Which RAM slots to fill first?

If you are installing memory in a dual-channel memory motherboard, install memory modules in pairs, filling the lowest numbered slots first. For example, if the motherboard has two slots each for channel A and channel B, numbered 0 and 1, fill the slots for channel A slot 0 and channel B slot 0 first.

Does it matter what order you put RAM in?

The RAM itself does not matter no, but the slots on the motherboard that you use does. There are two slots that are used for the heap memory, meaning the computers temporary variables, and the other two are used solely for logical storage. Pending on what you are doing on your computer, it might matter.

Is it better to have 1 or 2 sticks of RAM?

Generally, a single 8GB is preferable. If you have two slots, you have the potential to upgrade by filling the second slot. However, if you are pretty certain that 8GB will be enough (and it probably will be), and a pair of 4GBs is cheaper than a single 8GB, then go for the pair.

Is it better to have 4 sticks of RAM or 2?

General rule with Ryzen is always to prefer 2 sticks over 4. If you want 32GB get 2x16GB. 2x8GB will have better timings/speeds though. the more physical chips on the dimm, the denser the routing and the worse signal integrity you get.

What happens if you put RAM in the wrong slots?

If you have two sticks of ram and two slots there is no such thing as a “wrong slot”. If you have 4 memory slots and you put your two sticks in the wrong slot (assuming it boots) then it will just run at lower performance then it could and windows would be oblivious to this.

Should you use all 4 RAM slots?

A common misconception about RAM is that you can put any RAM into any slot. … If you have four RAM slots, always buy matched pairs of RAM (two sticks from the same company, same speed, and same capacity) for the best results.

Can you put 2 RAM sticks next to each other?

If Dual Channel is designed in, generally modules will install on the first and third socket, or second and fourth socket, again depending upon design. If in this case SDRAM modules are inserted next to each other, the board resorts to single channel mode.

Is it better to fill all RAM slots ddr4?

Is it better to fill all RAM slots? It depends on your system. If it supports dual channel memory only, there is no advantage to installing more than 2 modules. If it supports 4 channel memory, installation 4 modules will perform better.

Can I run 3 sticks of RAM?

To answer your question yes you can use three sticks of ram, however you will not get the maximum performance from it like you will from matched pairs in dual channel. For stability & performance, never mix sets and always configure in dual channel mode.

Can I add 8gb RAM to 4gb laptop?

If you want to add more RAM than that, say, by adding an 8GB module to your 4GB module, it’ll work but the performance of a portion of the 8GB module will be lower. In the end that extra RAM probably won’t be enough to matter (which you can read more about below.)

Is 32gb RAM overkill?

Is 32GB overkill? In general, yes. The only real reason an average user would need 32GB is for future proofing. As far as just simply gaming goes, 16GB is plenty, and really, you can get by just fine with 8GB.

Does it matter which DIMM slot I put my ram in?

The DIMM slots for your RAM are usually right next to your CPU. … Now, logic would suggest that those with two sticks of RAM to install should put them in slots 1 and 3. But listening to logic is silly when building a PC, because most motherboards will probably tell you you need to put them in slots 2 and 4 instead.