Question: Can You Nail PVC Trim Boards?

Can you attach a storm door to PVC trim?

The PVC I hung storm doors on is brick mold and is about 1.5 inches thick.

Storm doors usually attach with a bunch of short screws all the way around the perimeter.

As long as the trim is fastened well to the underlying framing then you should have no problem..

Is PVC trim better than wood?

PVC trim and molding profiles are also much more flexible than comparable wood dimensions and can be easily heat-formed to create specialty shapes and sizes such as half-round window trim. Some of the other common non-structural applications for PVC trim and moulding products include: … Window trim and sill nosing.

How do you fasten a PVC board?

PVC cement is used on any joint that doesn’t require an expansion gap. For fastening use stainless steel trim nails so the nails will last as long as the trim. Nail within two inches from the edge of the boards and at least every 18 inches along the length. You can also use a screw and plug system.

What is the best way to fasten PVC trim?

Fasten PVC trim with stainless steel screws or hot-dipped siding nails. When it comes to choosing your fasteners, don’t scrimp by using fasteners that won’t last as long as the vinyl trim. Stainless steel screws with small finish heads are the best choice because they’ll never corrode.

Is PVC board as strong as wood?

Traditional Wood vs. In this match-up, PVC started off very strong, scoring many points in the first quarter for durability, strength and ease of installation. The plastic contender is a cost-effective building material that can outlast harsh weather and has a long shelf-life.

Can you use a nail gun on PVC trim?

Nail guns can be used – PSI between 80- 100 dependent upon gun, nail, outside temperature and substrate. Use 7d trim screws to better control expansion / contraction. In temps under 40°F pre-drilling may be required, depending on the fastener used.

Can you screw into PVC board?

Self-tapping machine or wood screws are recommended. It is recommended that holes be pre-drilled for screws being inserted as self-drilling screws do not work well. … This is because the screws, under torque, could de-thread and come loose from the pipe. This method is not recommended for PVC pipe sizes 3/4″ and under.

What type of nails to use with PVC trim?

Use the Proper Fasteners Stainless steel trim screws are the best choice because they’ll never corrode. You can also use hot-dipped galvanized nails, but they may corrode over time. PVC expands and contracts with temperature changes, so fasten it well. Fasten to framing, never just into the sheathing.

Does PVC trim need to be primed?

1. Does PVC trim require a primer? A primer is only needed if you want the paint manufacturer’s warranty. Excellent adhesion can be achieved by properly cleaning the board before applying a topcoat of paint to PVC trim.